PiroStiker AST

ast_r_120
PiroStiker R

Fire extinguisher for sockets. It is installed directly inside the socket where short circuit, overheating or sparking is possible. In automatic mode, fire extinguishing is ensured.

ast_60_120
PiroStiker AST 60

PiroStiker AST 60 is a brand new fire extinguisher specially designed for fire protection in small devices, such as distribution boards, cabinets, safes, etc.

ast_15
PiroStiker AST 15

PiroStiker AST 15 is a brand new fire extinguisher, specially designed for fire protection in small appliances, such as distribution boards, cabinets, safes, etc.

ast_25
PiroStiker AST 25

PiroStiker AST 25 is a brand new fire extinguisher, specially designed for fire protection in small appliances, such as distribution boards, cabinets, safes, etc.

ast_45
PiroStiker AST 45

PiroStiker AST 45 is a brand new fire extinguisher, specially designed for fire protection in small appliances, such as distribution boards, cabinets, safes, etc.

ProStiker R

 

Fire extinguisher for sockets. It is installed directly inside the socket where short circuit, overheating or sparking is possible. In automatic mode, fire extinguishing is ensured.

PiroStiker AST R – these are millions of microcapsules with an active fire extinguishing agent and a plasticizer that allows the device to have any shape. This is a truly innovative way to protect property, and sometimes life.

The PiroStiker AST R is so compact that it is located next to a potential source of fire. The micro-structure does not require maintenance for years. It is absolutely autonomous, energy-independent and is activated in an automatic mode, currently burning fire, and does not involve objects that are not threatened by fire.

Instructions for use

Installation of PiroStiker

  • PiroStiker AST R should be installed directly in the socket of the socket, above the contact group, in its upper part, with an active layer facing down.
  • Prepare the surface for the installation of PiroStiker. The surface must be dry, cleaned of dust, dirt and grease.
  • Carefully remove the protective film from the PiroStiker adhesive layer.
  • Push the PiroStik firmly onto the prepared surface and hold it for a few seconds.
  • PiroStiker is installed and ready to work.

Technical characteristics of AST R

Product dimensions, mm
30 х 30 х 2
Product weight, g 2,5
To extinguish a class fire A, B, C, E
Maximum protection capacity, l 0,2
Optimum temperature conditions for exploitation, °С from -40 to 40
Degree of protection of the object IP20
Activation temperature, ºС 120

Recommendations for use

  • Use PiroStiker in electrical cabinets and sockets with degree of protection IP20 and more.
  • In case of PiroStiker activation due to fire, remove the cause of the fire (overload, short circuit, faulty wires, etc.).
  • After removing the cause of the fire, replace PiroStiker with a new one.
  • Periodically check PiroStiker, whether it has external damage, contamination of the active component, installation safety.
  • Replace the PiroStiker in case of external damage, contamination of the active component, repair of electrical installations, the appearance of fire traces, expiration date.

Turn off the power before installing PiroStiker in a live object!

Keep away from children!

Be sure to ventilate the room after fire extinguishing with PiroStiker. During the extinguishing of polymeric materials (insulation of wires, devices, etc.) it is possible to release toxic substances.

Do not use PiroStiker components in your diet!

During installation it is forbidden to carry out activities that lead to mechanical damage to PiroStiker or to exposing PiroStiker heat over 80 °С.

ProStiker AST 60

 

PiroStiker AST 60 is a brand new fire extinguisher, specially designed for fire protection in small appliances, such as distribution boards, cabinets, safes, etc.

PiroStiker AST 60 works as an intelligent fire extinguishing system. The effect of temperature on its active components causes immediate activation with the weakening of strong burning inhibitors, until the final fire suppression.

Micro-encapsulation of flame-extinguishing liquids ensures its preservation in the unchanged form under normal conditions during the life of the product, as well as the emission intensity at the activation temperature.

Instructions for use

Installation of PiroStiker AST 60

  • PiroStiker AST 60 should be installed in the central upper part of the building or directly above the electrical equipment, the active layer facing downwards.
  • Prepare the surface for the installation of PiroStiker. The surface must be dry, cleaned of dust, dirt and grease.
  • Carefully remove the protective film from the PiroStiker adhesive layer.
  • Push the PiroStik firmly onto the prepared surface and hold it for a few seconds.
  • PiroStiker is installed and ready to work.

Technical characteristics of AST 60

Product dimensions, mm
190 х 90 х 3
Product weight, g 40±1
To extinguish a class fire A, B, C, E
Maximum protection capacity, l 60
Optimum temperature conditions for exploitation, °С from -40 to 40
Degree of protection of the object IP20
Activation temperature, ºС 120

Recommendations for use

  • Use PiroStiker in electrical cabinets and sockets with degree of protection IP20 and more.
  • In case of PiroStiker activation due to fire, remove the cause of the fire (overload, short circuit, faulty wires, etc.).
  • After removing the cause of the fire, replace PiroStiker with a new one.
  • Periodically check PiroStiker, whether it has external damage, contamination of the active component, installation safety.
  • Replace the PiroStiker in case of external damage, contamination of the active component, repair of electrical installations, the appearance of fire traces, expiration date.

Turn off the power before installing PiroStiker in a live object!

Keep away from children!

Be sure to ventilate the room after fire extinguishing with PiroStiker. During the extinguishing of polymeric materials (insulation of wires, devices, etc.) it is possible to release toxic substances.

Do not use PiroStiker components in your diet!

During installation it is forbidden to carry out activities that lead to mechanical damage to PiroStiker or to exposing PiroStiker heat over 80 °С.

ProStiker AST 15

 

PiroStiker AST 15 is a brand new fire extinguisher, specially designed for fire protection in small appliances, such as distribution boards, cabinets, safes, etc.

 

PiroStiker AST 15 works as an intelligent fire extinguishing system. The effect of temperature on its active components causes immediate activation with the weakening of strong burning inhibitors, until the final fire suppression.

Micro-encapsulation of flame-extinguishing liquids ensures its preservation in the unchanged form under normal conditions during the life of the product, as well as the emission intensity at the activation temperature.

Instructions for use

Installation of PiroStiker AST 15

  • PiroStiker AST 15 should be installed in the central upper part of the building or directly above the electrical equipment, the active layer facing downwards.
  • Prepare the surface for the installation of PiroStiker. The surface must be dry, cleaned of dust, dirt and grease.
  • Carefully remove the protective film from the PiroStiker adhesive layer.
  • Push the PiroStik firmly onto the prepared surface and hold it for a few seconds.
  • PiroStiker is installed and ready to work.

Technical characteristics of AST 60

Product dimensions, mm
85 х 45 х 2
Product weight, g 10±0,5
To extinguish a class fire A, B, C, E
Maximum protection capacity, l 15
Optimum temperature conditions for exploitation, °С from -40 to 40
Degree of protection of the object IP20
Activation temperature, ºС 120

Recommendations for use

  • Use PiroStiker in electrical cabinets and sockets with degree of protection IP20 and more.
  • In case of PiroStiker activation due to fire, remove the cause of the fire (overload, short circuit, faulty wires, etc.).
  • After removing the cause of the fire, replace PiroStiker with a new one.
  • Periodically check PiroStiker, whether it has external damage, contamination of the active component, installation safety.
  • Replace the PiroStiker in case of external damage, contamination of the active component, repair of electrical installations, the appearance of fire traces, expiration date.

Turn off the power before installing PiroStiker in a live object!

Keep away from children!

Be sure to ventilate the room after fire extinguishing with PiroStiker. During the extinguishing of polymeric materials (insulation of wires, devices, etc.) it is possible to release toxic substances.

Do not use PiroStiker components in your diet!

During installation it is forbidden to carry out activities that lead to mechanical damage to PiroStiker or to exposing PiroStiker heat over 80 °С.

ProStiker AST 25

 

PiroStiker AST 25 is a brand new fire extinguisher, specially designed for fire protection in small appliances, such as distribution boards, cabinets, safes, etc.

 

PiroStiker AST 25 works as an intelligent fire extinguishing system. The effect of temperature on its active components causes immediate activation with the weakening of strong burning inhibitors, until the final fire suppression.

Micro-encapsulation of flame-extinguishing liquids ensures its preservation in the unchanged form under normal conditions during the life of the product, as well as the emission intensity at the activation temperature.

Instructions for use

Installation of PiroStiker AST 25

  • PiroStiker AST 25 should be installed in the central upper part of the building or directly above the electrical equipment, the active layer facing downwards.
  • Prepare the surface for the installation of PiroStiker. The surface must be dry, cleaned of dust, dirt and grease.
  • Carefully remove the protective film from the PiroStiker adhesive layer.
  • Push the PiroStiker firmly onto the prepared surface and hold it for a few seconds.
  • PiroStiker is installed and ready to work.

Technical characteristics of AST 25

Product dimensions, mm
110 х 65 х 2
Product weight, g 15±0,7
To extinguish a class fire A, B, C, E
Maximum protection capacity, l 25
Optimum temperature conditions for exploitation, °С from -40 to 40
Degree of protection of the object IP20
Activation temperature, ºС 120

Recommendations for use

  • Use PiroStiker in electrical cabinets and sockets with degree of protection IP20 and more.
  • In case of PiroStiker activation due to fire, remove the cause of the fire (overload, short circuit, faulty wires, etc.).
  • After removing the cause of the fire, replace PiroStiker with a new one.
  • Periodically check PiroStiker, whether it has external damage, contamination of the active component, installation safety.
  • Replace the PiroStiker in case of external damage, contamination of the active component, repair of electrical installations, the appearance of fire traces, expiration date.

Turn off the power before installing PiroStiker in a live object!

Keep away from children!

Be sure to ventilate the room after fire extinguishing with PiroStiker. During the extinguishing of polymeric materials (insulation of wires, devices, etc.) it is possible to release toxic substances.

Do not use PiroStiker components in your diet!

During installation it is forbidden to carry out activities that lead to mechanical damage to PiroStiker or to exposing PiroStiker heat over 80 °С.

ProStiker AST 45

 

PiroStiker AST 45 is a brand new fire extinguisher, specially designed for fire protection in small appliances, such as distribution boards, cabinets, safes, etc.

 

PiroStiker AST 45 works as an intelligent fire extinguishing system. The effect of temperature on its active components causes immediate activation with the weakening of strong burning inhibitors, until the final fire suppression.

Micro-encapsulation of flame-extinguishing liquids ensures its preservation in the unchanged form under normal conditions during the life of the product, as well as the emission intensity at the activation temperature.

Instructions for use

Installation of PiroStiker AST 45

  • PiroStiker AST 45 should be installed in the central upper part of the building or directly above the electrical equipment, the active layer facing downwards.
  • Prepare the surface for the installation of PiroStiker. The surface must be dry, cleaned of dust, dirt and grease.
  • Carefully remove the protective film from the PiroStiker adhesive layer.
  • Push the PiroStiker firmly onto the prepared surface and hold it for a few seconds.
  • PiroStiker is installed and ready to work.

Technical characteristics of AST 45

Product dimensions, mm
130 х 90 х 3
Product weight, g 25±0,7
To extinguish a class fire A, B, C, E
Maximum protection capacity, l 45
Optimum temperature conditions for exploitation, °С from -40 from 40
Degree of protection of the object IP20
Activation temperature, ºС 120

Recommendations for use

  • Use PiroStiker in electrical cabinets and sockets with degree of protection IP20 and more.
  • In case of PiroStiker activation due to fire, remove the cause of the fire (overload, short circuit, faulty wires, etc.).
  • After removing the cause of the fire, replace PiroStiker with a new one.
  • Periodically check PiroStiker, whether it has external damage, contamination of the active component, installation safety.
  • Replace the PiroStiker in case of external damage, contamination of the active component, repair of electrical installations, the appearance of fire traces, expiration date.

Turn off the power before installing PiroStiker in a live object!

Keep away from children!

Be sure to ventilate the room after fire extinguishing with PiroStiker. During the extinguishing of polymeric materials (insulation of wires, devices, etc.) it is possible to release toxic substances.

Do not use PiroStiker components in your diet!

During installation it is forbidden to carry out activities that lead to mechanical damage to PiroStiker or to exposing PiroStiker heat over 80 °С.